Description
The circular embroidery attachment allows you to sew fancy
and decorative circles or semicircles of various diameters using
utility or decorative stitches or lettering. It is also suitable for
appliqu�ing ribbons. Using the extension table increases the
sewing-bed area, making it ideal for precise decorative sewing.
The attachment is screwed to the freearm. The center of rotation can be either to the right or left of the needle, with the attaching screw lying flat enough to allow the fabric to feed smoothly over it. A diameter of between 1 inch and 5.3125 inches (2.5 cm and 13.5 cm) can be set on the slide.
The fabric must be properly reinforced for circular embroidery, so 2-3 layers of stabilizer should be placed under your project. The fabric is put onto the pin at the center of the desired circle and held in place with a rubber cap to prevent shifting during sewing. The Circular Embroidery Attachment #83 can be used in conjunction with various presser feet, and will enable you to sew circles with any decorative stitches you wish, and even arrange lettering in a circle.
Compatible Machines
- B: 125, 125S, 135, 135S, 145, 145S, 210, B215, 220, 230, 230PE, 240, B325, B330, B335, B350PE, B380, 130, 140, 150, 153, 153QE, 155, 160, 163, 165, 170, 430, 440QE, B555, B570QE, 630, B530, B550QE
- C: 180, 185, 200, 730, 435, 450, B560, B580, 640
- D: B710, B750QE, B780
- E 7Series: B720, B735, B740, B770QE, B770QE PLUS, B790, B790 PLUS
- E 5Series: B535, B540, B570QE, B590
- E 4Series: B475QE, B485, B480
- F: B820QE, B830, B880, B880 PLUS